@nizwiz wrote:
Hi,
I believe i can only use PDFCreator 1.7.3 for the reasons detailed in this post - forums.pdfforge.org/t/i-share-printer-but-does-print-nothing-from-the-pc-where-is-shared/7028/3
Is it still possible to obtain this version? I can only find in the older releases going back to version 2.0.1
Can anyone please help?
Thanks
Posts: 1
Participants: 1
@Katswiri wrote:
Bisher habe ich nie mit Metadaten bei PDF-Dateien gearbeitet, aber beim PDFcreator bietet sich das wunderbar an.
Genial wäre es, wenn PDFcreator sich verwendete Stichwörter merken und als Auswahl anbieten würde, um eine spätere Suche zu vereinfachen.
LG
Anke
Posts: 1
Participants: 1
@MrHiggens wrote:
Hello!
Yesterday I ordered and payed directly € 9,95 with the use of an Ideal paiement for your product the PDF creator free from adds for one year.
I am very dissapointed that I have not received a mail with further download instructions and a password or something from you.
In fact I have payed and have not received anything!
There is no possibilitty to mail directly to your company, so I use this way to make clear that I am not amused and not satisfied!
You can check that I ordered and I payed directly from the Netherlands.I hope and demand that you fix this!
John Hagens
Posts: 1
Participants: 1
@sanfermin999 wrote:
Hallo,
ich habe PDFCreator 2.3.2 Bulid 6 installiert und versuche, den Titel mit einem regulären Ausdruck zu ersetzen. Zum Testen habe ich das Beispiel aus der Hilfe eingetragen:
Suchtext: .*.zip(.+)
Ersetzen durch: $1Sobald ich speichere, schließen sich die Anwendungseinstellungen und lassen sich auch nicht mehr öffnen. Im Log sehe ich folgenden Fehler:
2016-08-01 07:59:12.9413 [Error] pdfforge.PDFCreator.Threading.ThreadManager.b__240: System.ArgumentException: parsing ".*.zip(.+)" - Too many )'s._
Was mach ich falsch? In welcher Datei werden die Ersetzungen gespeichert? Im Moment muss ich das Programm deinstallieren und neu installieren, damit ich die Anwendungseinstellungen wieder öffnen kann.
Gruß,
sanfermin999
Posts: 1
Participants: 1
@rohan wrote:
Hi there,
We are currently using the PDF creator 1.7.3 in our windows application on Windows 7.
Can you please confirm ,if we still have support for the same and if not ,then is there a way for requesting extension in support.
Posts: 1
Participants: 1
@SewQ86 wrote:
Hello,
for some time I have a problem with combining PDF files. When you attempt to link files program remembers the previous files, which have been combined before. Restart spooler service helps only until the first run PDF Creator.
Please help.
Posts: 1
Participants: 1
@hfp wrote:
Good evening, I have the PDF Creator1.2.3 installed on a Terminal Server 2008 R2, what happens is that sometimes when two users are used at the same time PDFCreator the document that User 1 is converting converts to User 2.
Thank you
Herivelton F. Pinto
Posts: 1
Participants: 1
@JMaples wrote:
I run PDF Creator on two Windows 7 PCs and ever since the recent end of July jumbo Windows 7 update I have had problems on both machines. I upgraded to the latest version of PDFC but the problems persist. A classic instance is that I print one page of an online document successfully using PDFC and go to add to it another page and find the PDFC (and PDF Architect and Msft XPS but not my HP Laser printer) has simply disappeared from the print options. Sometimes I can recover the position by restarting PDFC (in which event the others return as well). But sometimes I get a message saying my spool driver needs restarting. In that event the only way out is to uninstall PDFC and PDF Architect - on one occasion having to delete all references to them in the Windows Registry and then reinstall.
Posts: 2
Participants: 2
@ACEDeSmedt wrote:
I use VBA in Excel to print a document to the PDFCreator Printer in combination with the autosave function.
Is there a way to get (or set) the target location of autosave feature using cmd.exe ?regards,
Klaas
Posts: 1
Participants: 1
@dibp2504 wrote:
When I create PDF files from Excel, Word or Visio and have one logical page per physical page, the files seem to be a realistic size.
If I take one of these PDF and use the print functionality to create a new PDF where there is either 2 logical pages printed on one physical page or 4 logical per physical, the resulting PDF is very large.One example:
- Original Vision file: 320KB
- Created a PDF (one document page for one physical page) via PDF Architect 4: 226KB
- Created a new PDF (two document pages for one physical page) from the original PDF via Print: 2.4MBAny ideas?
Posts: 1
Participants: 1
@sanfermin999 wrote:
Sorry for the double post, but as I did not get any answer in the German forum, I will try my luck again here.
I have installed PDFCreator 2.3.2 Bulid 6 and try to replace the title with the help of a regular expression. For testing I used the example from the help:
Search text: .*.zip(.+)
Replace with: $1As soon as I save, the application settings get closed and I can't open them anymore. In the log file I can see the following error:
2016-08-01 07:59:12.9413 [Error] pdfforge.PDFCreator.Threading.ThreadManager.b__240: System.ArgumentException: parsing ".*.zip(.+)" - Too many )'s._
Please help, what am I doing wrong?
Greetings,
sanfermin999
Posts: 2
Participants: 2
@CatalinDiaconescu wrote:
Hello,
After a virus hit one of our computer, I cannot activate the license 'cose I already use that code. Is the same computer, same configuration, just a different Windows OS. Please tell me how to activate your product using my license code.
Thank you,
Posts: 2
Participants: 2
@princesservicedesk wrote:
We have an instance where the PDF Creator print queue disappears from a users available printers.
This is affecting users on a thin client connected to a terminal server. Our terminal servers all run on Windows Server 2008 R2 Enterprise (service pack 1) and this happens randomly on any one of our 14 terminal servers.
The profile isn't cached on the server when the user logs off and we have recreated his entire user profile but the problem keeps reoccurring.
Other than installing the latest version of PDF creator is there anything that can be done?
Thanks
Andy
Posts: 1
Participants: 1
@philoutte wrote:
Hello,
I have an issue on one of my computer: I ask to PDF Creator to print a 3 pages document. On my computer, by default, the program creates one file with 3 pages. On my wife's computer, the program wants to print 3 files with one page.
I searched in the options but they seems to be the same.
How can I do to have only 1 file with 3 pages by default on her computer as it is on mine ?
Thank you,
Philippe
Posts: 1
Participants: 1
@Jaf wrote:
Hello
Is it possible to get 1 trial license to install PDF Creator on Terminal Server and test it before going ahead to buy multiple licenses ?Regards
Jaf
Posts: 2
Participants: 2
@pdfcreator29072012x wrote:
Ich würde eine sehr einfache commercial license benötigen, mit Funktionsumfang exakt wie PDFCreator gratisversion, ohne irgendwelche weitere Zusätze, ohne Plus, ohne Business, ohne PDF hot folder, ohne PDF Print Server, ohne nichts, und ohne Werbung im laufenden Betrieb.
Ich möchte auch keinerlei Aktivierungs- und Lizenzierungsprobleme im Betrieb haben, da es selbständig ohne Systembetreuung funktionieren sollte, wie die Gratisversion auch.
Früher gab es mal Programme mit einer Checkbox "I paid".Am betreffenden Ort sind 2 seats, da wird fast nichts benötigt und liegt nichts an Problemen und an Betreuung drin.
Würde eine Donation helfen?
Was meint PDF, inc. dazu.
(Das Problem stellt sich auch bei anderen Gratisprogrammen, wo die paidversion zusätzliche unerwünschte (weil komplizierend) und unbenötigte Funktionen hat)
(+Ich will auch keinerlei priority support, ich will produkte einsetzen die im wesentlichen ohne individuellen hersteller-support auskommen.)
(++Oder als Anregung ein Lizenzkeyfile, wo der company name+vielleicht anzahl seats drin ist fürs About... und damit hat es sich. Und das programm läuft egal ob keyfile vorhanden tupfengleich.)
Posts: 2
Participants: 1
@pdfcreator29072012x wrote:
I would prefer the pdfforge symbol on the forum pages would link to pdfforge.org instead of to forums.pdfforge.org.There seems to be no way to reach pdfforge.org from the forums with just a click.
Thank you.
Posts: 1
Participants: 1
@randsg wrote:
Ability to Sign: Add Text, Add Checkmark, place signature appear to be no longer available. What can I do to get these features using Windows 10.
Posts: 1
Participants: 1
@SteffenH wrote:
Hallo zusammen,
ich nutze den PDFCreator Server. Es funktioniert auch soweit alles Wunderbar.
Allerdings habe ich nun die Anforderung die PDF-Dateien mit einem Passwort zu verschlüsseln.
Dies wäre einfach wenn alle PDFs das selbe Kennwort bekommen sollen.
Die Anforderung ist aber, dass der User das Passwort für jede PDF selbst festlegen soll.Ist dies umsetzbar und wie?
Viele Grüße
Posts: 3
Participants: 2
