@PDFLover wrote:

I just purchased pdfcreator plus, yet I couldn't have it installed.
When prompted for license key, it read "No answer from license server!" I am using Windows 10.

Please refund.

Posts: 2

Participants: 2

Read full topic

@sinkovics wrote:

In academic articles (and CVs) there is frequently a need to
conform to a bibliographic standard called APA.

In the last version of this referencing standard by the
American psychological association, they ask for the DOI (digital object
identifier) to be included.

In APA 6th the following reference is an example:

Sinkovics,
N., Hoque, S. F., & Sinkovics, R. R. (2016). Rana plaza collapse aftermath:
Are CSR compliance and auditing pressures effective? Accounting, Auditing,
and Accountability, 29(4), 617-649. doi: 10.1108/AAAJ-07-2015-2141

The doi always resolves like this: http://dx.doi.org/10.1108/AAAJ-07-2015-2141

Is there a way that when printing references, as per the
example below, using PDFCreator, the PDF output can accommodate the doi to be
directly clickable?

Example 1:

Tüselmann, H., Sinkovics, R. R., & Pishchulov, G.
(2016). Revisiting
the standing of international business journals in the competitive landscape. Journal
of World Business, 51(4), 487-498. doi:
10.1016/j.jwb.2016.01.006 --- where 10.1016/j.jwb.2016.01.006
is clickable/highlighted as http://dx.doi.org/10.1016/j.jwb.2016.01.006

Example2:

Tüselmann,
Heinz, Rudolf R. Sinkovics, and Grigory Pishchulov (2016), "Revisiting the
standing of international business journals in the competitive landscape,"
Journal of World Business, 51 (4), 487-498. (DOI: 10.1016/j.jwb.2016.01.006).

Or in
this variation of the above stlye, again the doi
10.1016/j.jwb.2016.01.006 is a direct link in the final
PDF?

Posts: 1

Participants: 1

Read full topic

@cam110711 wrote:

Hello friends
sorry but i need help
I have this code in Delphi but this occurs an error (Invalid index Please check the index parameter.) in the job code: = PDFObject.NextJob;
=====================================
PDFObject: CreateOleObject = ('PDFCreator.JobQueue');
PDFObject.Initialize;
if DataModule1.ambientecte = 'APPROVAL' then
Filename: = 'c: \ temp \' + Qprincipalcodcon.AsString + '. pdf'
else
Filename: = 't: \ public \ DRAFT \' Qprincipalcodcon.AsString + +; 'pdf.'
Relatorio.PrinterSetup.Copies: = 1;

if not PDFObject.WaitForJob (10) then
showmessage ('The print job does not reach the line within 10 seconds')
else
begin
job: = PDFObject.NextJob;
job.ConversionProfileByGuid: = 'DefaultGuid';
job.ConvertTo (filename);
end;
Relatorio.TextFileName: = filename;
Relatorio.Print;

Posts: 2

Participants: 2

Read full topic

@timo1 wrote:

HotFolder feature will work only if user is logged on the workstation. The goal is to automatically convert all valid files in a specific directory into pdf/a format as a service.

So. What is the proper way to implement a such function? Is the "PDFCreator Server" a right product?

Regards
Timo

Posts: 1

Participants: 1

Read full topic

@alexandre_arkiane wrote:

Hello,

We detected an error in this page :
docs.pdfforge.org/pdfcreator/latest/en/pdfcreator/com-interface/user-manual/basics/printers/

new ActiveXObject("PDFCreator.PDFCreator");
should be
new ActiveXObject("PDFCreator.PDFCreatorObj");

Sincerly,
Alex

Posts: 2

Participants: 2

Read full topic

@Laurie11 wrote:

Using a predefined profile to AutoSave with new file name.

Exception:
SecurityException
Requested registry access is not allowed.
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at SystemWrapper.Microsoft.Win32.RegistryKeyWrap.OpenSubKey(String name)
at pdfforge.PDFCreator.Core.Printer.PrinterPortReader.ReadPrinterPort(String portName)
at pdfforge.PDFCreator.JobInfoQueue..ctor()
at pdfforge.PDFCreator.App.InitializeJobInfoQueue()
at pdfforge.PDFCreator.App.RunApplication(String[] commandLineArguments)
at pdfforge.PDFCreator.App.App_OnStartup(Object sender, StartupEventArgs e)

Environment:
Microsoft Windows NT 6.1.7601 Service Pack 1

Platform:
x64

Environment variables:
SESSIONNAME=Console
ProgramFiles(x86)=C:\Program Files (x86)
USERDNSDOMAIN=CSHA2.LOCAL
ProgramW6432=C:\Program Files
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 60 Stepping 3, GenuineIntel
TMP=C:\Users\vjm\AppData\Local\Temp
PROCESSOR_ARCHITECTURE=AMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
COMPUTERNAME=VJM2015-WIN7
HOMEPATH=\
configsetroot=C:\Windows\ConfigSetRoot
PROCESSOR_REVISION=3c03
TEMP=C:\Users\vjm\AppData\Local\Temp
USERPROFILE=C:\Users\vjm
LOGONSERVER=\CSHA-NT6
USERNAME=vjm
SystemRoot=C:\Windows
SWSHARE=C:\SWSHARE
FP_NO_HOST_CHECK=NO
TVTCOMMON=C:\Program Files (x86)\Common Files\Lenovo
CommonProgramFiles=C:\Program Files\Common Files
COMMPath=C:\Program Files\Lenovo\Communications Utility
ProgramData=C:\ProgramData
windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log
HOMESHARE=\csha-nt6\usr\vjm
SESSIONID=1
ALLUSERSPROFILE=C:\ProgramData
CommonProgramW6432=C:\Program Files\Common Files
READYAPPS=C:\SWTOOLS\ReadyApps
windows_tracing_flags=3
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
HOMEDRIVE=U:
windir=C:\Windows
SystemDrive=C:
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
ProgramFiles=C:\Program Files
ComSpec=C:\Windows\system32\cmd.exe
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
APPDATA=C:\Users\vjm\AppData\Roaming
USERDOMAIN=CSHA2
PROCESSOR_LEVEL=6
LOCALAPPDATA=C:\Users\vjm\AppData\Local
TVT=C:\Program Files (x86)\Lenovo
Path=C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\SWTOOLS\ReadyApps;C:\Program Files (x86)\Common Files\Lenovo;C:\Program Files (x86)\Shoreline Communications\ShoreWare Client\;C:\Program Files (x86)\Shoreline Communications\ShoreWare Client\win64
PUBLIC=C:\Users\Public

Additional Data:

Logs:
2016-08-27 14:07:44.7640 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 650 files, 458 scanned, 435 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-08-27 14:07:44.7840 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-08-27 14:08:06.9152 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 650 files, 458 scanned, 435 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-08-27 14:08:06.9452 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-08-31 11:37:44.0946 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-08-31 11:37:44.1476 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-01 17:33:15.0088 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-01 17:33:15.0538 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-02 08:44:04.3753 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-02 08:44:04.4043 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-02 08:44:15.5614 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-02 08:44:15.5884 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-02 08:47:05.8732 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-02 08:47:05.8993 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-02 08:49:53.0053 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-02 08:49:53.0273 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-06 11:05:24.3864 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-06 11:05:24.4464 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-06 11:23:38.9946 [Error] pdfforge.PDFCreator.Core.Jobs.GhostscriptJob.RunJobWork: Ghostscript execution failed: Scanning C:\Windows\Fonts for fonts... 652 files, 460 scanned, 437 new fonts.
Querying operating system for font files...
This PostScript file was created from an encrypted PDF file.
Redistilling encrypted PDF is not permitted.

2016-09-06 11:23:39.0156 [Error] pdfforge.PDFCreator.Core.Jobs.AbstractJob.RunJob: Executing Ghostscript failed
2016-09-08 15:17:19.9189 [Error] pdfforge.PDFCreator.App.App_OnStartup: There was an error while starting PDFCreator System.Security.SecurityException: Requested registry access is not allowed.
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at SystemWrapper.Microsoft.Win32.RegistryKeyWrap.OpenSubKey(String name)
at pdfforge.PDFCreator.Core.Printer.PrinterPortReader.ReadPrinterPort(String portName)
at pdfforge.PDFCreator.JobInfoQueue..ctor()
at pdfforge.PDFCreator.App.InitializeJobInfoQueue()
at pdfforge.PDFCreator.App.RunApplication(String[] commandLineArguments)
at pdfforge.PDFCreator.App.App_OnStartup(Object sender, StartupEventArgs e)
The Zone of the assembly that failed was:
MyComputer
2016-09-08 15:17:19.9389 [Error] pdfforge.PDFCreator.App.App_OnStartup: There was an error while starting PDFCreator System.Security.SecurityException: Requested registry access is not allowed.
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at SystemWrapper.Microsoft.Win32.RegistryKeyWrap.OpenSubKey(String name)
at pdfforge.PDFCreator.Core.Printer.PrinterPortReader.ReadPrinterPort(String portName)
at pdfforge.PDFCreator.JobInfoQueue..ctor()
at pdfforge.PDFCreator.App.InitializeJobInfoQueue()
at pdfforge.PDFCreator.App.RunApplication(String[] commandLineArguments)
at pdfforge.PDFCreator.App.App_OnStartup(Object sender, StartupEventArgs e)
The Zone of the assembly that failed was:
MyComputer
2016-09-08 15:17:19.8589 [Error] pdfforge.PDFCreator.App.App_OnStartup: There was an error while starting PDFCreator System.Security.SecurityException: Requested registry access is not allowed.
at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)
at SystemWrapper.Microsoft.Win32.RegistryKeyWrap.OpenSubKey(String name)
at pdfforge.PDFCreator.Core.Printer.PrinterPortReader.ReadPrinterPort(String portName)
at pdfforge.PDFCreator.JobInfoQueue..ctor()
at pdfforge.PDFCreator.App.InitializeJobInfoQueue()
at pdfforge.PDFCreator.App.RunApplication(String[] commandLineArguments)
at pdfforge.PDFCreator.App.App_OnStartup(Object sender, StartupEventArgs e)
The Zone of the assembly that failed was:
MyComputer

Posts: 1

Participants: 1

Read full topic

@CREW wrote:

I want to add a new user profile by writing in the registry. I'd like that all keys are created automatically.

I noticed that If I change the "numClasses" by putting n + 1 in HKEY_CURRENT_USER\SOFTWARE\pdfforge\PDFCreator\Settings\ConversionProfiles and if I open and close PDFCreator (the interface), a new profil is created and all keys and GUID value are created automatically.

There is a refresh command instead of to open and close the interface ?

I tried to open and close PDFCreator with COM object but it does not work : keys are not created.

If the only solution is to open and close the interface with a ShellExecute , I need to know the full installation path. I also need the version number . How to read the informations ?

Posts: 1

Participants: 1

Read full topic

@gregruehle wrote:

Our process copies a file to the Hot Folder while it is started. The powerpoint presentation is associated with the PPTVIEW.EXE (Powerpoint Viewer). Nothing happens.

If I manually print to the Hot Folder (clicking the print dialog) it works as expected. We need to bypass the print dialog of course.

Is copying the file enough? If I run PPTVIEW from commandline I always get the print dialog. What am I doing wrong, or not doing.

Would be nice to actually have a POC sample to work from.

Greg

Posts: 1

Participants: 1

Read full topic

@Tim2 wrote:

Hallo zusammen,

ich habe das Problem, dass ich in den Profileinstellungen -> Automatisches Speichern in der alten Version des PDF-Creators (Version 1.7.3) immer den Token verwendet habe, um PDF-Dateien dort abzulegen.

Seitdem ich jedoch letztens die Version des PDFCreators geupdatet habe(auf 2.3) wird der Token nicht mehr erkannt.

Gibt es eine Alternative zu dem Token, bei dem man dem Pfad nicht statisch angeben muss? Oder heißt er jetzt evtl anders?

Liebe Grüße

Posts: 5

Participants: 2

Read full topic

@zup wrote:

Hi, I'm setting up and old laptop with Windows 98SE. My printer is not supported on that OS, so I'm going to print my documents on PDF and then transfer it to that printer.

The only problem is that modern versions of PDF Creator don't work on Windows 98SE. The earlier version I've tried was 1.7.3.

Does anybody knows what was the latest version to support Windows 98?

Thanks.

Posts: 3

Participants: 2

Read full topic

@mi5 wrote:

Hi to Everybody!

I try to Print on a CMD like this:

pdfcreator.exe /InitializeSettings /IF"C:\temp\test.txt" /PF"c:\temp\TestFile007.pdf"

It Looks like ready. But I'cant see any Output- File. What do I wrong?

I got the PDFCreator 2.3.

Thanks to all for any Help!!

Posts: 2

Participants: 2

Read full topic

@Anupama wrote:

We have been using PDF Creator 1.* (ad free version) and we want to test the latest ad-free version (PDF Creator plus 2.3.2). For this reason I have the following questions:

1. Can I install PDF Creator plus 2.3.2 on Windows Server 2008/2012. Is this supported?
2. Can I get a trial version.

Thanks,
Anupama

Posts: 2

Participants: 2

Read full topic

@vknowles2000 wrote:

I just uninstalled my old PDFCreator, restarted my computer, and ran the setup for v2.3.2. It ran briefly then displayed a window saying I needed to restart the computer to complete the installation. I thought that was strange because it was only about 10 seconds since I started it, and I had not seen any of the usual dialogs. So I restarted, and waited, and nothing has happened.

It is not in my Programs and Features.

Running Win10 Home 64bit.

I decided to post this here rather than trying to run it again.

???

Thanks!

Posts: 3

Participants: 3

Read full topic

@ledwithja wrote:

I get this error when I try to install PDF Creator ver. 1.2.3. Can this be fixed? I appreciate your help.

Posts: 1

Participants: 1

Read full topic

@ChristianG wrote:

Hallo,

ich hatte leider etwas zu viuel aufgeräumt und daher leider den Sourcecode der letzten VB Version (1.7.3) entsorgt Leider finde ich den Sourcecode und auch das Sertup auch nicht mehr zum herunterladen.

Ebenso sind trotz Ankündigung seit mehreren Versionen keine Source Codes mehr zum Download bereit gestellt worden.
Deutet das auf eine Änderung hin zu Closed Source?

Gruß
Christian

Posts: 3

Participants: 2

Read full topic

@chillath wrote:

hello, i was wondering if creator can do pdf merge automatically multiple works without the need to press the merge button.
thanks

Posts: 1

Participants: 1

Read full topic

@Glenruth wrote:

Hi

If I have created two user profiles, how can I pass a command line to tel PDFCreator which profile to use.

Many thanks

Posts: 1

Participants: 1

Read full topic

@Bgtes wrote:

I am using PDFCreator to print web pages and send them via email. I know there are tokens that can add different identifiers to the email text. Is there a token for the url that the PDF is printing? If not, is there any way to add the url to the body of the email text? (PS- it's been a very long while since I've coded anything, so I'm hoping that there is an 'off the shelf' answer to this question.) Thanks.

Posts: 1

Participants: 1

Read full topic

@woodrun wrote:

Hi,

We have purchased four TS licenses for PDF Creator and the product installs and works correctly.

We are unable to validate the license automatically so we use manual mode which worked.

However, every time we log out and back in again, PDF creator asks us to validate the license again.

I can see in the registry our unique ID and license request activation code, is there a way I can store the activation code returned from the website so the server can see the software is activated ok.

regards

Nick.W

Posts: 2

Participants: 2

Read full topic

@mencoxx wrote:

Hi, this is my first topic...

I have a procedure to generate pdf microsoft access I found that in version 1.7 and the size is 86 kb while in version 2.3 and 106 kb.

how do you explain maybe something wrong

Thanks a Lot
Domenico

Posts: 1

Participants: 1

Read full topic