September 2, 2017, 7:43 pm
@John_Blumstein wrote:
Ich schaffe es einfach nicht, auch nur eines der COM-Beispielscripts von 2.5.3 auszuführen. Es führt jedes Mal zu einem Crash. Ich habe es mit VB6 versucht und auch mit VBScript.
Ich verwende VirtualBox 5.1.20 und habe es mit 2 verschiedenen Hosts versucht: XP SP3 Pro und Windows 7 Pro 64-Bit. Bei beiden Betriebssystemen kommt es zu demselben Fehler.
Dies wird mir beim Crash von VBScript angezeigt:
Problemsignatur:
Problemereignisname: CLR20r3
Problemsignatur 01: WScript.exe
Problemsignatur 02: 5.8.7601.18283
Problemsignatur 03: 5258a6e6
Problemsignatur 04: Obsidian
Problemsignatur 05: 1.0.0.0
Problemsignatur 06: 57ad7548
Problemsignatur 07: 39
Problemsignatur 08: 26
Problemsignatur 09: System.ArgumentException
Betriebsystemversion: 6.1.7601.2.1.0.256.48
Gebietsschema-ID: 1031
Zusatzinformation 1: 71d0
Zusatzinformation 2: 71d015fa079638ebcf48ac28c4a0d97e
Zusatzinformation 3: 8f1a
Zusatzinformation 4: 8f1a976e70ed2c343cd4f6e79375f213
Ich habe keine Ahnung, was ich davon halten soll. Kann PDFCreator zurzeit leider nur in den virtuellen Systemen ausprobieren.
Vielen Dank für jeden Hinweis …
Posts: 1
Participants: 1
Read full topic
↧
September 5, 2017, 9:20 am
@Wasatch_IT wrote:
Hello,
I am attempting to help a user that receives an error when emailing out of PDFCreator 2.5.
After setting up the email settings we are able to send test emails but can not send emails with PDFs attached. Every time we try we receive error 11999,
I’ve followed instructions I’ve located here /t/pdfcreator-2-4-0-microsoft-outlook-2003/9508 but it has not helped. The user has outlook 2010. Does anyone have any other ideas? Your help will be greatly appreciated.
Thanks,
Cody S.
Posts: 2
Participants: 2
Read full topic
↧
↧
September 6, 2017, 8:57 pm
@VeeNushii_VeeBallazt wrote:
When we try to add ref via PDFCreator.exe from Tools>reference>
We got add error "Can’t add reference to the specified file"
We just download lasted version 3.0
Posts: 1
Participants: 1
Read full topic
↧
September 8, 2017, 8:23 am
@rcs wrote:
I installed the Creator module MSI which installs the PDF Architect 5 virtual printer but it’s not working. Each time I attempt to print to that virtual printer, it fails to print (no save dialog box).
I noticed the PDF Architect 5 Creator service isn’t started and starting that service gives this critical application error:
Application Error Event ID 1000 Task Category (100)
Faulting application name: creator-ws.exe, version: 5.0.28.34044, time stamp: 0x595cfd83
Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098858e
Exception code: 0x40000015
Fault offset: 0x000a327c
Faulting process id: 0x1758
Faulting application start time: 0x01d328b3b3939673
Faulting application path: C:\Program Files (x86)\PDF Architect 5\creator-ws.exe
Faulting module path: C:\Windows\system32\MSVCR110.dll
Report Id: f1470ec3-94a6-11e7-8a11-509a4c52fd5d
and this critical system error:
Source: Service Control Manager Event ID: 7034
The PDF Architect 5 Creator service terminated unexpectedly. It has done this x time(s).
-
System
[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager
[ Qualifiers] 49152
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8080000000000000
[ SystemTime] 2017-09-08T15:04:00.326734700Z
EventRecordID 19911
Correlation
[ ProcessID] 756
[ ThreadID] 2548
Channel System
Computer XXX
Security
-
EventData
param1 PDF Architect 5 Creator
param2 5
-
If it’s relevant, the PID referenced (756) is services.exe (services and controller app)
The ONLY module installed is the PDF Architect 5 Create Module.
Is there a required module for this to work? I haven’t seen any documentation requiring such.
Thank you~
Posts: 1
Participants: 1
Read full topic
↧
September 11, 2017, 12:48 am
@steven_podrouzek wrote:
Hi There. Is it possible to send a web url to the PDF Server and the it will print to pdf and place onto a folder?
Thank you
Steven
Posts: 1
Participants: 1
Read full topic
↧
↧
September 11, 2017, 9:22 am
@userone wrote:
Tried many version but pdf Creator isn’t working anymore.
Uninstall cleanup machin and same error keeps comming up in pdfcreator.log
Any help would be appreciated! Can’t fin any solution.
Now having latest version installed on Win7x64
Here is the log file
2017-09-11 11:57:40.8993 [Fatal] pdfforge.PDFCreator.Editions.EditionBase.ProgramBase.CurrentDomain_UnhandledException: Uncaught exception, IsTerminating: True System.TypeInitializationException: Une exception a été levée par l’initialiseur de type pour ‘MS.Win32.Penimc.UnsafeNativeMethods’. —> System.Runtime.InteropServices.COMException: Classe non enregistrée (Exception de HRESULT : 0x80040154 (REGDB_E_CLASSNOTREG))
à MS.Win32.Penimc.UnsafeNativeMethods.CoCreateInstance(Guid& clsid, Object punkOuter, Int32 context, Guid& iid)
à MS.Win32.Penimc.UnsafeNativeMethods.CreatePimcManager()
à MS.Win32.Penimc.UnsafeNativeMethods…cctor()
— Fin de la trace de la pile d’exception interne —
à MS.Win32.Penimc.UnsafeNativeMethods.CreateResetEvent(IntPtr& handle)
à System.Windows.Input.PenThreadWorker…ctor()
à System.Windows.Input.PenThreadPool.GetPenThreadForPenContextHelper(PenContext penContext)
à System.Windows.Input.StylusWisp.WispTabletDeviceCollection.UpdateTabletsImpl()
à System.Windows.Input.StylusWisp.WispTabletDeviceCollection.UpdateTablets()
à System.Windows.Input.StylusWisp.WispTabletDeviceCollection…ctor()
à System.Windows.Input.StylusWisp.WispLogic.get_WispTabletDevices()
à System.Windows.Input.StylusWisp.WispLogic.RegisterHwndForInput(InputManager inputManager, PresentationSource inputSource)
à System.Windows.Interop.HwndStylusInputProvider…ctor(HwndSource source)
à System.Windows.Interop.HwndSource.Initialize(HwndSourceParameters parameters)
à System.Windows.Window.CreateSourceWindow(Boolean duringShow)
à System.Windows.Window.ShowHelper(Object booleanBox)
à System.Windows.Window.ShowDialog()
à pdfforge.Obsidian.Helper.WpfTopMostHelper.ShowDialogTopMost(Window window, Boolean revertWhenActive)
à pdfforge.Obsidian.Helper.OpenWindowHelper.ShowWindowTopmost(Window window, Boolean isModal)
à pdfforge.Obsidian.Helper.OpenWindowHelper.ShowWindow(Window window, IInteraction interaction, Boolean isModal, Action callback)
à pdfforge.Obsidian.InteractionInvoker.Invoke[T](T interaction)
à pdfforge.PDFCreator.UI.ViewModels.MainWindowThreadLauncher.MainWindowLaunchThreadMethod()
à pdfforge.PDFCreator.Utilities.Threading.SynchronizedThread.RunThread()
à System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
à System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
à System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
à System.Threading.ThreadHelper.ThreadStart()
System.Runtime.InteropServices.COMException Classe non enregistrée (Exception de HRESULT : 0x80040154 (REGDB_E_CLASSNOTREG))
Posts: 2
Participants: 1
Read full topic
↧
September 13, 2017, 12:09 pm
@bdullea wrote:
Trying to setup PDF Creator to print a web page and save a copy to a URL at the same time. Works great on some PC’s. On others it will keep generating the same print job over and over. Doesn’t stop until you kill the PDFCreator executable. Any help would be appreciated.
The machines having trouble so far are Windows 7, 64 bit. Printing from Chrome or Firefox.
I have tried PDF Creator versions 2.53 and the new 3.00 and have the same issue.
Posts: 1
Participants: 1
Read full topic
↧
September 14, 2017, 12:00 pm
@TurboGuy wrote:
Hey guys,
My company uses PDFCreator to print documents from our ERP, and automatically attach the generated PDF to a new Outlook email.
Up to now, we’ve been using 1.7.0 to do this, but I’m looking to migrate us to 2.5.3.
My issue is that I’d like to eliminate the step where after printing, the pdfcreator prompt pops up, and the user needs to click on email to actually attach to the email.
This seems to be possible using automatic saving, however I don’t seem to be able to use “” as the auto save directory like with 1.7.0. I’ve tried using “%USERPROFILE%\Local Settings\Temp” but run into permission issues. The PDFCreator.log ends up with errors like this:
2017-09-14 13:35:25.9201 [Error] pdfforge.PDFCreator.Conversion.Ghostscript.Conversion.GhostscriptConverter.DoConversion: There was an unexpected error while converting the Job C:\Users\u3508\AppData\Local\Temp\PDFCreator\Spool\10-9E53E5756CC14DAEB714246203A055BD.inf: System.UnauthorizedAccessException: Access to the path ‘%USERPROFILE%\AppData\Local\Temp’ is denied.
This is how it was configured back in the day:
Do you have any suggestions for configuring a temp directory? This is going to be deployed to many users with PDQ Deploy, so I’m hoping we can use a local variable rather than having to visit every computer to configure their printer settings.
Thanks
Posts: 1
Participants: 1
Read full topic
↧
September 15, 2017, 5:22 am
@viper73 wrote:
Hello,
i installed (on Win 10 64bit) PDF Creator without the PDF Architect and want to print an document with an QR Code on it. When i open the created document i have only an red sqare where the QR Code should be.
With other PDF printers it shows the correct QR Code, only on PDF creator i get this red square.
Any suggestions how i can fix this?
Greets, viper73
Posts: 1
Participants: 1
Read full topic
↧
↧
September 20, 2017, 6:53 am
@alexis1972 wrote:
Bonjour,
J’ai un souci sur le profil obligatoire que j’applique aux étudiants de l’IUT où je travaille.
Si je crée un utilisateur de test avec un compte local tout fonctionne bien. Avec deux pdf je peux avoir accès à l’option “Convert with PDFCreator” ce qui me permet de fusionner les deux.
Avec un étudiant qui se connecte avec mon profil par défaut, cela ne fonctionne pas. Je n’ai plus cette option.
La seule différence avec le profil local est la redirection du bureau et mes documents vers une ressource Z.
Je ne vois pas d’où peut venir le problème. Je ne pense pas que cela vienne de la redirection.
Si quelqu’un a une idée, je suis preneur.
Merci
Posts: 3
Participants: 2
Read full topic
↧
September 20, 2017, 3:28 pm
@garyhawthorne wrote:
Hi:
I am using the latest freeware PDFCreator with Access VBA. Please help me figure out how to attach 2 existing PDF files to my new print job. I am trying this and it does not work:
Initialize… etc
docmd.OpenReport(“MyReport”)
If Not PDFCreatorQueue.WaitForJob(10)…etc
Set pJob = PDFCreatorQueue.NextJob
pJob.SetProfileByGuid (“DefaultGuid”)
pJob.SetProfileSetting “AttachmentPage.Enabled”, "True"
pJob.SetProfileSetting “AttachmentPage.File”, “c:\database\AttachmentPage1.pdf”
pJob.SetProfileByGuid ("DefaultGuid")
pJob.SetProfileSetting "AttachmentPage.Enabled", "True"
pJob.SetProfileSetting "AttachmentPage.File", "c:\database\AttachmentPage2.pdf"
Posts: 2
Participants: 2
Read full topic
↧
September 20, 2017, 3:37 pm
@garyhawthorne wrote:
VBA Access
When I print a report in Access and then PDFCreatorQueue.WaitForJob(10)
and the job shows up in time why do I need to then execute the line
Set pJob = PDFCreatorQueue.NextJob
if I am not printing another report?
Isn’t each print job a separate Job?
Thanks for any help!
Posts: 2
Participants: 2
Read full topic
↧
September 21, 2017, 3:16 am
@clinicbalear wrote:
Hi,
We need generate PDF and sign it with a TOPAZ tablet, how solution must we choose?
Is it possible to automate processes?
Thanks. Regards.
Posts: 1
Participants: 1
Read full topic
↧
↧
September 21, 2017, 5:21 am
@nbrishimov wrote:
Hi guys,
We are experiencing the following issue. We are using pdf printing from SAP over Citrix. We use sessions from the pdf printer.
The default paper size is Letter instead of A4. It is not possible to change it somehow to A4 as some parts of the printed pages are cut. The only possibility to change the format is when you go on Printer Properties right before the document is printed out and on the advance settings - select format A4.
Is there any chance to change the paper size to A4 by default so that we don’t have to adjust the settings every time?
Thanks,
Nedyalko
Posts: 5
Participants: 2
Read full topic
↧
September 21, 2017, 7:05 am
@PMS wrote:
Hello,
Recently we upgraded from the old free PDF Creator to the new PDF Creator Server edition and have been experiencing an issue with the spooler. It would appear it might be causing a corrupted spooler file, because the spooler service is unable to start until we clear C:\Windows\System32\spool\PRINTERS.
Print jobs are set to render on clients computer and after the last spooler crash we have disabled the advanced printing features to hopefully reduce the number of errors on the servers spooler.
Here are some additional details from event viewer:
Faulting application name: spoolsv.exe, version: 6.3.9600.17480, time stamp: 0x54585db9
Faulting module name: pdfcmon.dll, version: 0.9.6.0, time stamp: 0x58ee2136
Exception code: 0xc0000409
Fault offset: 0x0000000000005202
Faulting process id: 0xe28
Faulting application start time: 0x01d331773108ff96
Faulting application path: C:\Windows\System32\spoolsv.exe
Faulting module path: C:\Windows\System32\pdfcmon.dll
Report Id: eee7ccfa-9e4e-11e7-80e8-00155d022162
Faulting package full name:
Faulting package-relative application ID:
Posts: 2
Participants: 2
Read full topic
↧
September 22, 2017, 4:29 am
@ucs wrote:
Hallo,
kurze Frage zur Konvertierung bzw. zum Print via PDFCreator(plus):
Hotfolder spuckt mir bei dem Versuch, eine pdf in ein Bildformat zu konvertieren, immer eine Fehlermeldung aus (nicht druckbar) - egal ob ich als Zielformat pdf, tif oder png angebe. Liegt also wohl am Quellformat (pdf). Ist es grundsätzlich möglich, via Hotfolder pdfs in tiff zu konvertieren? Oder gibt es einen Workaround?
Danke und Gruß!
Posts: 1
Participants: 1
Read full topic
↧
September 22, 2017, 9:48 am
@Kurt_Bertel wrote:
Habe heute die Version 3.0.1 installiert.
Beim initialisieren von PDFCreator.JobQueue erhalte ich einen Ausnahmefehler.
Windows 10 17.3 64 Bit
Aufruf aus eine 32 Bit Anwendung.
Nach Deinstallation und Installation der Version 2.5.3 funktioniert es wieder.
Waran könnte es liegen?
LG Kurt
Posts: 1
Participants: 1
Read full topic
↧
↧
September 23, 2017, 2:30 pm
@TheGarpster wrote:
As a professional custom newsletter publisher, I (still) use Adobe’s Pagemaker 7.0, unsupported since 2001. ![:frowning:]( ":frowning:")
Invariably the .PMD file must be converted to a PDF and found PDFCreator does a great job, until recently. Suddenly I get an “Internal Ghostscript error (29100)” notice, and it proceeds no further.
I downloaded the latest version of PDFCreator (Version 3.0.0) but it did n better. I see there have been others with this same problem but saw no solutions.
Can you help?
TIA
Posts: 1
Participants: 1
Read full topic
↧
September 24, 2017, 10:15 pm
@RTVTools wrote:
Hello,
I was installing PDF Creator V 3 today (just downloaded from your website) and noticed that I got an HTTP 403 error during the install.
The installer was trying to download and install op.exe
Can you confirm that this is not a malicious executable?
Thank you
Posts: 1
Participants: 1
Read full topic
↧
September 25, 2017, 1:16 am
@ColinD wrote:
What a great pity that in PDF Creator Plus Version 3.0.0 someone decided to change the save method and remove the ability of saving to the last used file location. Now every time I save a file I have to go all the way through the folder structure to the required folder. A real pain when you are creating PDFs which go into the same folder.
Can you change it for the next version please and revert to having the “save to last used folder” facility.
Posts: 1
Participants: 1
Read full topic
↧
